Alkyd Gloss Enamel 1212
Premium solvent-based gloss enamel for metal and wood.
The product, up close.
The problem it solves.
Metal and wood need a hard, glossy coat that resists weather and wear. Water-based paints will not bond or last on metal and joinery.
A synthetic alkyd gloss — durable, high-shine, weather and abrasion resistant, in 12 colours.
Fabricators, joiners and contractors coating doors, railings and steelwork.
Metal, wood and primed masonry.
What it is.
A premium quality solvent-based finish formulated from high-grade synthetic alkyd resins, lightfast pigments and selected additives for a smooth, high-gloss finish with excellent durability, colour retention and weather resistance.
Where it performs.
Why specifiers choose it.
Excellent gloss retention
Smooth & durable finish
Superior hiding power
Excellent adhesion
Good weather resistance
Good abrasion resistance
Excellent colour retention
Easy application
Interior & exterior use
The engineering data.
Extracted directly from the MCC Technical Data Sheet — read it here, take the PDF for your file.
| Product type | Gloss Enamel |
| Finish | High gloss |
| Base | Solvent |
| Colour | 12 colours |
| Solid content | 55 ± 3% |
| Coverage | 8–10 m²/L |
| Viscosity | 85–100 KU @ 25°C |
| Density | SG 1.15 ± 0.05 |
| Surface dry | 4–6 hours (touch) |
| Recoat | 12–14 hours |
| Thinning | El-Madina Thinner |
| Packaging | Per colour range |
| Tools | Brush · Roller · Conventional spray |
Varies with surface texture, porosity and application method.
Drying timesHigh gloss · 12 colours.
How it's applied.
Surfaces clean, dry and free of rust, grease and loose particles.
Apply a suitable primer before the finishing coats.
Stir thoroughly before use.
Apply two coats over a primed surface, allowing drying between coats.
Get the surface ready.
- ✓ Clean, dry, rust-free surface
- ✓ Apply a suitable metal/wood primer
A suitable primer for the substrate is recommended before application. View primers →
Specify the whole job.
Alkyd Gloss Enamel 1212 performs as part of a complete coating system. Each layer has a job.
Supply.
Pack sizes are confirmed at order through your regional MCC sales team. Request a quote.
Take it to your project file.
Common questions.
What coverage should I expect?
How long does it take to dry?
Can it be coloured?
Which surfaces is it suitable for?
Supplied across Libya.
Alkyd Gloss Enamel 1212 is distributed through MCC's national network — 17 service points across the Eastern, Western and Southern regions.
Specify with confidence.
Our technical team can confirm the full system, coverage and quantities for your project.
Specify Alkyd Gloss Enamel on your project.
Tell us your surface and area — our engineering team will confirm the system, coverage and supply through your nearest distributor.